CCIE Wireless v3.1 Lab Workgroup Bridge Basic Configurations YouTube

Workgroup Bridge. Configure WorkGroup Bridge on the WAP131 Access Point Cisco A workgroup bridge is a networking device that extends the Wi-Fi network coverage by connecting a wired network to a wireless network This makes this AP acting as special type of client to the root AP

PPT Introducing Wireless LANs PowerPoint Presentation, free download
PPT Introducing Wireless LANs PowerPoint Presentation, free download from www.slideserve.com

hostname AAP2 ! dot11 ssid WGB vlan 110 authentication open infrastructure-ssid ! We recommend setting the WGB bridge client timeout value to default value of 300 seconds, or less in environment where change is expected, such as:.

PPT Introducing Wireless LANs PowerPoint Presentation, free download

--> In workgroup bridge mode, An Access Point associates to another access point as a client and provides a network connection for the devices that are connected to its Ethernet port.--> If your access point has two radios, either the 2.4-GHz radio or the 5-GHz radio can function in workgroup bridge mode. To avoid a bridge loop on your network, disconnect the workgroup bridge from your wired LAN before or soon after you configure it as a workgroup bridge. A workgroup bridge connects to a wired network over a single wireless segment by learning the MAC address of its wired clients on the Ethernet interface and reporting them to the lightweight access point using Internet Access Point Protocol (IAPP) messaging

Configure WorkGroup Bridge on the WAP131 Access Point Cisco. hostname AAP2 ! dot11 ssid WGB vlan 110 authentication open infrastructure-ssid ! If you want to configure a WGB to work with non-cisco APs, then you have to configure WGB as universal WGB (or uWGB)

Workgroup Bridge (WGB) basics first details later. --> In workgroup bridge mode, An Access Point associates to another access point as a client and provides a network connection for the devices that are connected to its Ethernet port.--> If your access point has two radios, either the 2.4-GHz radio or the 5-GHz radio can function in workgroup bridge mode. An access point in workgroup bridge mode can introduce a bridge loop if you connect its Ethernet port to your wired LAN